AVG-UHMS66
Controlling a far-end output device from local IR Port
Connect an IR receiver with IR carrier to the IR IN port of AVG-UHMS66, users can control far-end output
displayer via its IR remote from local.
In that case, the IR signal is transferred via twisted pair. Only the corresponding IR OUT port can emit control
signals to the remote display.
See the figure below:
Controlling a far-end device from Local IR Port
Note: The IR receiver connected to IR IN must be with IR carrier
The IR signal received from IR ALL IN port will be transmitted to all the six far-end HDBaseT receivers connected
to HDBaseT ports of the AVG-UHMS66. See as below:
Control far-end device through IR ALL IN port
Summary of Contents for AVG-UHMS66
Page 29: ...AVG UHMS66 7 Panel Drawing ...
