AVGear AVG-UHMS66, User Manual

Page: 18 / 30

AVG-UHMS66
Command Function Feedback Example
[x1]V[x2].
Transfer the AV signal from the input channel [x1] to the
output channel [x2]. AV: X1-> X2
(X1/X2=1~6)
[x1]B[x2].
Transfer the AV and IR signal from the input channel
[x1] to the output channel [x2]. AV: X1-> X2
(X1/X2=1~6)
Status[x]. Check the I/O connection status of output [x]
AV: Y-> X
(X=1~6, Y=1~6)
Status.
Query the input channel to the output channels one by
one.
AV: 1-> X1
AV: 2-> X2
AV: 3-> X3
AV: 4-> X4
AV: 5-> X5
AV: 6-> X6
Save[Y].
Save the present operation to the preset command [Y],
ranges from 0 to 9.
Save To FY (Y=0-9)
Recall[Y]. Recall the preset command [Y]. Recall From FY (Y=0-9)
Clear[Y]. Clear the preset command [Y]. Clear FY (Y=0-9)
PWON. Work in normal mode. PWON
PWOFF.
Enter into standby mode and cut off the power supply to
HDBaseT receivers.
PWOFF
STANDBY.
Enter into standby mode. (Do not cut off the power
supply to HDBaseT receivers, press other buttons or
send other commands to start.)
STANDBY
Audio/[X]:[Y].
Select HDMI audio or analog audio as audio source for
output 1~6.
Audio/[X]:[Y].
X=1~6, Y=0 (HDMI audio) or
1 (Analog audio).
/%[Y]/[X]:[Z].
HDCP management command.
[Y] is for input (value: I) or output (value: O); [X] is the
number of the port, if the value of X is ALL, it means all
ports; [Z] is for working status (value: 1 or 0). /%[Y]/[X]:[Z].
Y=I/O;
X=1~6 or ALL;
Z=1/0
[x1]R[x2].
Transfer the IR signal from input channel [x1] to output
channel [x2]. IR: X1-> X2
(X1/ X2=1~6)
DigitAudioON[x].
Enable HDMI audio output of port x.
X=1, 2, 3, 4, 5, 6, enable this port.
X=7, enable all the 6 ports.
DigitAudio ON with [x]
x=1~6 or ALL
DigitAudioOFF[x].
Disable HDMI audio output of port x.
X=1, 2, 3, 4, 5, 6, disable this port.
X=7, disable all the 6 ports.
DigitAudio OFF with [x]
x=1~6 or ALL