A V G 9 .0 A nti- V irus Bus ines s E dition © 2 0 0 9 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
9 6
The
Save settings
button allows you to save the previously selected configuration.
You can use it when running this wizard again simply by loading the settings in the
very beginning.
Click the
Finish
button to close the wizard.
There are several options for how to use the produced script file. Here are the two
most common examples:
To use the script saved to a folder:
1.
Copy the whole content of the previously chosen folder to your station.
Note:
If you used a network folder for storing the script, you can navigate to
that folder directly over the network.
2.
On the station navigate to this folder and run the AvgSetup.bat file.
3.
The command line window will appear and the installation will begin.
4.
Once the installation is completed, the window will close automatically.
You can also put the script on a removable device, such as an external hard drive,
USB flash disk etc.
To use the script from a removable device:
