A V G 9 .0 A nti- V irus Bus ines s E dition © 2 0 0 9 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
2 0 6
There are three main ways how to manage users' access:
·
Allowed actions
It is possible to disallow access to different actions on a local station by
managing allowed actions - for more information see chapter
Configuration/
Shared Settings for Stations/Groups/
Allowed Actions
.
·
Mandatory settings
The mandatory/monitored settings can be used for disabling/enabling various
actions within the station settings. By marking an item as mandatory, the user
on the local station will not be able to customize it.
For more information see chapter
Configuration/Shared Settings for Stations/
Groups/
General control and priority levels
.
·
Scheduled scan cancellation
You can decide, whether you want to allow the local user to stop a running
scheduled scan or not. This can be done via Shared settings for stations/groups
or in the individual station settings. To do so, navigate to
Schedules/
Scheduled
scan
item and in the right part of the dialog tick the
User can stop
a running task
checkbox.
11.8. Requests handling and status messages
This chapter describes requests, their handling and processing within AVG DataCenter.
·
Requests sent to a single station
If a request is invoked from AVG Admin Console (e.g. request for settings
synchronization, update performing, etc.) a message appears in the Status
Window and at the same time, the request is stored within the AVG DataCenter.
Then the station is notified about the request and if it is online, it will start
processing it immediately. Information about the result is delivered back to the
AVG DataCenter and instantly displayed in the Status window. Error messages
appear in red color.
In special cases two situations may happen:
·
The station is online but for some reason cannot accept the request (e.g.
notification port is not working correctly for some reason), the server will
try to periodically delivery the request (default interval is five minutes).
Note:
This interval can be changed in Shared settings for stations/groups,
Remote Administration item, advanced settings section,
Retrieve
messages from server every
drop down menu.
