A V G 9 .0 A nti- V irus Bus ines s E dition © 2 0 0 9 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
2 2 6
This mode requires AVG DataCenter support (so the mode is not accessible when
the AVG Admin Server is used only for update management).
The AVG Admin Server gets the stations’ (or their IP addresses’) list from the
AVG DataCenter in the automatic mode and sends the update command to them.
The principle is the same as for the AVG Admin Server Console application – the
command is stored in the AVG DataCenter and a notification is sent to the
station. When a station cannot be reached, it will process the command within
the next synchronization with the AVG DataCenter database.
In the
Inform clients about update type of
section you can choose to inform
stations either about
Virus database
updates or
Program
updates using the
respective radio button.
·
Manual Mode (the Automatic mode option is not checked)
Define specific IP addresses of AVG stations for update distributions in the
manual mode. You can divide your clients into two groups, when you want to
define different rules for particular clients. This mode can be used even if there
is no AVG DataCenter support.
In the
Time until next attempt to connect (minutes)
specify the time (in
minutes), after which the server should try to contact stations that have not
been responding during the previous attempts. It will try to connect to all clients
until all of them are informed about the update or the allowed number of
connection attempts is exceeded.
The fields for each group are as follows (the X stands for the group number):
o
Clients IP addresses - Set X
– the list of clients’ IP addresses; available
forms of values are: full IP address, station name, list of IP addresses
divided by comma, IP address range (using the start and the end address
of range, divided by a dash) or address combined with network mask.
Examples of address specifications follow:
122.64.200.216 (IP address)
122.64.200.125-122.64.200.133 (IP address range)
192.168.0.1,192.168.0.3 (list of IP addresses divided by comma)
station26 (station name)
10.10.2.0/255.255.255.0, 122.64.200.173 (subnet mask and address)
o
Max. number of connection attempts in Set X
– the maximum number of
connection attempts for the given set; if set to 0, an unlimited number of
attempts is allowed. The default values are 1 for the first set and 0 for the
second.
