A V G 9 .0 A nti- V irus Bus ines s E dition © 2 0 0 9 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
9 2
·
Reboot the computer after finishing AVG 9.0 setup if needed
- in certain
cases (Firewall component installation for example) a computer restart may be
required to complete the installation process.
·
Show installation progress
- from the drop down menu select one of the
following:
o
hidden installation
- no information will be displayed to the currently
logged user during the setup process.
o
show installation progress only
- the installation will not require any
user attention, but the progress will be fully visible on the station.
o
show installation wizard
- the installation will be visible on the station
and the currently logged user will need to manually confirm all steps.
·
Display a notification message regarding scheduled system restart on the
remote computer
- If the previous checkbox is checked, you can also define a
delay before the restart will take place. The default value is ten minutes.
Note:
This option is not supported in MS Windows 2000.
In the
Setup properties
section you can choose from the following options:
·
Where to install
- if you prefer a customized target location for installation, you
can choose it by entering the path here. We recommend keeping the default
settings.
·
Setup language
- choose a custom language for AVG installation.
·
Select folder where AVG 9.0 setup LOG file will be stored
- if you prefer a
custom location for setup log files, select it here (the folder must already exist
on the target station).
