A V G 9 .0 A nti- V irus Bus ines s E dition © 2 0 1 0 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
1 4 7
8.2.3. Completion
If the script creation proceeded successfully, you will see a dialog similar to this one.
Click the
Finish
button to close the wizard.
To use the script saved to a folder:
1.
Copy the whole contents of the previously chosen folder to your station.
Note:
If you used a network folder for storing the script, you can navigate to
that folder directly over the network.
2.
On the station navigate to this folder and run the AvgSetup.bat file.
3.
The command line window will appear and the installation will begin.
4.
Once the installation is completed, the window will close automatically.
To use the script from a removable device:
1.
Insert the removable device to your station.
2.
If the autorun feature is enabled in the station's operating system, the
installation will start automatically.
3.
If not, open the removable device disk letter and run the AvgSetup.bat file
