Avery Weigh-Tronix M3060 User Instructions Download Page 37

Page: 37 / 50

M3060 User Instructions

5.9 About M3060 Module

5.9

About M3060

Module

The

About M3060

module shows you the revision and part number of the firmware. It

is available when you enter either of the passwords.

Select the

About M3060

module and you will see a screen that shows you the

Avery Weigh-Tronix company name, the model number, a copyright statement,
the part number, the version of software in the instrument and revisions of
related software.

Figure 5.11 About M3060 screen

Press

Exit

to return to the previous screen.

5.10

Audit Trail Viewer

Module

The

Audit Trail Viewer

module displays a list of dates and times when changes

occurred. It is available when you enter either of the passwords.

Choose the

Audit Trail Viewer

and you will see a screen similar to the one

below:

Figure 5.12 Sample Audit Trail

Figure

5.12

shows the record number, date and time, parameter and old

and new values of changes that have been made to the indicator.

Press and drag the scroll bars or press the

Page UP

and

Page Down

keys to

move left/right/up/down through the information.

Summary of Contents for M3060



















































Search results

Summary of Contents for M3060

Reviews:

Related manuals for M3060

Brands by name

Popular brands

Avery Weigh-Tronix M3060, User Instructions

Search results

Summary of Contents for M3060

Reviews:

Related manuals for M3060

Brands by name

Popular brands