18
M3060 User Instructions
3
Installation
4.
Attach the desktop mounting bracket to the M3060.
Figure 3.6 Mounting Bracket to Indicator
5.
Adjust the indicator to the desired angle.
6.
Tighten the bracket knobs finger-tight.
Figure 3.7 Tighten Knobs
7.
Proceed to
Routing the Scale Interface Cable
.
3.3 Routing the Scale Interface Cable
The scale interface cable is the cable that runs from the junction box (j-box) to the
indicator.
For systems with multiple Weigh Bars, you must use a junction box. For information
on available junction boxes, contact your Avery Weigh-Tronix representative.
