M3060 User Instructions
13
2.3 Rear Panel of the M3060
You may also see the following annunciators or onscreen messages in various other
screens.
2.3 Rear Panel of the M3060
The M3060 connectors are shown as they appear on the back of the indicator in Figure
and individually for greater detail following.
Figure 2.3 M3060 connectors
Each of the connectors shown in
is explained in detail on the following
pages.
BUSY
At various times you will see popup boxes showing the system is busy. These will
disappear after the process is complete.
~
This symbol may appear in some menu screens and is the same as the arrow
pointing to
Motion
.
UNDER LOAD
Scale is below the configured underload range.
— — — — —
A series of five dashes at the bottom of the display indicates the scale is below the
configured underload range (same as
UNDER LOAD
).
OVER LOAD
Scale is above the configured overload range.
— — — — —
A series of five dashes at the top of the display indicates the scale is above the
configured overload range (same as
OVER LOAD
).
NO ADC
No communication with the analog card.
>0<
Scale is at center of zero. (Same as arrow pointing at >0<).
lb/kg /gram/oz/
custom
The current unit of measure.
Gross or Net
Indicates current scale mode; Gross weighing or Net weighing. This is the same as
the arrow pointing to
Gross
or
Net
.
Reference
Description
Details
1
Scale Connector
Connect cable from junction box.
2
Power Connector
Connect power cable.
3
COM 3 Connector
Connect serial cable to peripheral. By default, this
port is to connect to the XLR8 remote display.
4
COM 2 Connector
Connect serial cable to peripheral.By default, this
port is to connect to the RD 40 RF.
5
COM 1 Connector
Connect serial cable to peripheral. By default, this
port is for a printer connection.