Avery Weigh-Tronix M3060, User Instructions

Page: 12 / 50

12 M3060 User Instructions
2 Introduction to the M3060
2.2 Display Symbols, Icons and Messages
Figure 2.2 shows the standard application screen with all the annunciators illuminated.
These items and other display messages are explained below.
Figure 2.2 Standard Application with all annunciators and touch keys
The standard annunciators are defined below.
5 TARE Press TARE to tare the weight on the scale for net weighing.
6 G/N Press G/N to toggle between gross and net weighing modes.
7 HOLD
Press HOLD to hold a displayed weight. The weight is retained in memory
in case the indicator is turned off. When powered up again, the held weight
will display. Press
HOLD again to release the hold mode.
8 PRINT Press PRINT to send data to an attached printer.
9 ZERO Press ZERO to zero the gross or net weight.
Reference Key Description
1 2
6
4
3
5
The screen shown in Figure 2.2 is for illustration purposes only. You would not
typically see ALL the annunciators at once.
Reference Description
1
When the arrow points to this annunciator, the weight is unstable. This will disappear
when the weight is stable. Transactions and scale functions will only operate when the
scale is stable.
2
When the arrow points to this annunciator, the scale is at center of zero.
3
When the arrow points to this annunciator, the indicator is in gross weighing mode.
4
When the arrow points to this annunciator, the indicator is in net weighing mode.
5
When the arrow points to this annunciator, the unit of measure is kilograms.
6
When the arrow points to this annunciator, the unit of measure is pounds.