1. SAFETY RULES
SAFETY INFORMATION
NOTICE: Important safety information. It is important for the safety of persons to follow these instructions.
After reading the manual, please save it just in case of need in the future
Do not allow children to play with the fixed controls (remote control).
Keep the remote control unit out of reach of children.
Frequently examine the screen installation for imbalance and signs of wear or damage to cables. Do not use if repair or
adjustment is necessary.
Watch the moving screen and keep the people away until the screen is completely rolled in/out. It will help to avoid
injuries caused with moving screen.
Do not attach any objects to the screen’s bottom bar. Screen damage and/or person injury danger.
All installation work should be carried out by the qualified technician.
Improper installation of the screen can cause device damage or health breakdown.
Ceiling/wall installation can be done with the originally supplied mounting brackets dedicated for this model only.
Do not do anything that may damage the power cable or power plug.
Do not damage the power cable: make any modifications by your own, put it near the hot objects, bend it strongly,
twist it, pull out the power cable, put the heavy objects on the cable, wrap it into the bundle.
Operation of the screen with damaged power cord can result with electric shock, electric short circuit and fire.
Do not touch the power cable and the power plug with wet hands.
Always follow the instructions described in the operating manual.
1.1. Declaration of Conformity CE
3
AVERS Screens Sp. z o.o.
Under it’s own responsibility declares:
All screensand accessories mentioned below are manufactured in Polandaccording to the essential safety
requirements of Council Directive 98/79/WE
Projection screens: Stratus, AkuStratus, Focus, Cumulus X, Solar, Solaris, Contour, Altus,
Cirrus CL, Cirrus X, Cirrus X crank
Projector mount brackets: Alumount, Promount, SimpleMount, Prolift
The above mentioned products are in conformity with the European Directives
and especially with the norms:
PN-EN 55014-1:2007(U)
PN-EN 50082-1:1997
PN-EN 60335-1:2004
PN-EN 61000-3-2:2007
PN-EN 61000-3-3:1997
IEC 60335-2-97:2007
Manufacturer’s Dedlaration of ConformityCE
