Check the screen module leveling before first unrolling the screen.
Do not use the screen if it is not properly.
- Modify the recessed ceiling checkerwork to create rectangular whole of 106 x W+191 mm dimensions, (W - screen
fabrics width in milimeters). Bottom flange of the properly installed ceiling module should be surfaced with the ceiling
checkerwork.
- Connect the screen module to the electric installation (see chapter 3.4)
- Fix the screen module inside the ceiling module. Use spiral installation springs and nuts. Check the screen module
leveling, perform regulation if needed. Secure the screen module fixing nuts with counter nuts.
- Arrange the handling magnets at the ceiling module bottom flange. leave distance of 30 cm between magnets.
- Fix the masking module safety ropes.
- Fix the masking module to the ceiling module. The masking module is installed properly when the screen bottom bar
remains located centrally in the module whole and it can move down without any interruption.
Pic.1 Installation of the rods and anchors in the ceiling
Pic.3 Screen module installatiuon
Pic.2 Ceiling modul installation
Rys.4 Masking module installation
6
2034 mm for Contour 18xxx
2334 mm for Contour 21xxx
2634 mm for Contour 24xxx
D =