Check the screen module leveling before first unrolling the screen.
Do not use the screen if it is not properly.
3.3. Screen installation in the cardboard-plaster recessed ceiling.
- Trace the shape of the ceiling module installation whole. Cut out the whole in the recessed ceiling according to the
traced shape.
- Slot up the ceiling module into the prepared whole and fix it with the installation springs.
- Connect the screen module to the electric installation (see chapter 3.4)
- Fix the screen module inside the ceiling module. Use spiral installation springs and nuts. Check the screen module
leveling, perform regulation if needed. Secure the screen module fixing nuts with counter nuts.
- Arrange the handling magnets at the ceiling module bottom flange. leave distance of 30 cm between magnets.
- Fix the masking module safety ropes.
- Fix the masking module to the ceiling module. The masking module is installed properly when the screen bottom bar
remains located centrally in the module whole and it can move down without any interruption.
Pic.5 Ceiling module installation slot preparation
Pic.7 Screen module installation
Pic.6 Ceiling module installation
Pic.8 Masking module installation
7
1991 mm for Contour 18xxx
2291 mm for Contour 21xxx
2591 mm for Contour 24xxx
D =
