86
-
Enlarge Camera View
Switch to only display video in Preview/Advanced mode from where the alarm is
activated.
a. Select the camera from drop down list to specify which camera video to be
enlarged on screen when the alarm is triggered.
~
Alarm Camera:
when a channel has an alarm occurred, and then, the
channel video that has an alarm occurred will be enlarged on screen.
~
Camera # (1~32):
the selected channel video that will be enlarged on
screen when an alarm is activated.
b.
Retrieve time:
set the waiting duration before system switching back to original
Preview mode. If the retrieve time is un-mark, the alarm video will keep enlarging
until user switch back to Preview mode manually. The retrieve time range is 3~
600 seconds.
-
Relay Output
Set to enable/disable the relay operation when the alarm is activated and to extend
additional time in second before it stops the relay operation (see also
-
Play Warning Sound
Play alarm sound. To setup click
Detail
(see also
).
-
Make Phone Calls
Dial and contact the number in the list. To setup click
Detail
(see also
).
To use this feature, the PC must have a voice modem connected to it. The supported
audio system is only 8KHz and 16Bit mono.
-
Send E-mail
Send an electronic text message. To setup click
Detail
-
File Transmission via FTP
Upload file to remote computer thru FTP (File Transfer Protocol). To setup click
Detail
).
-
Start Recording
Record the video from the selected camera. To setup click
Detail
