85
6. In
(5) Alarm Reset
, click the camera number (use
W
and
X
to select the alarm) to set the
reset condition of alarm. Once alarm is reset, all alarm action will stop at the moment. If
the sensor normal status is high, set the sensor condition to low.
To set sensor status of IP camera, click
IP Camera Sensor
. In IP Camera Alarm Setting
windows, click
High
/
Low
to set sensor status.
7. In
(6) Action
,
you may now set the alarm action for the system to perform when the alarm
condition is activated.
-
Launch E-Map
Display mini Emap screen.
-
TV Out
Switch to only display the video on TV from where the alarm is activated or selected
camera.
a. Select the camera from drop down list to specify which camera video to be
displayed on TV when the alarm is triggered.
~
Alarm Camera:
when a channel has an alarm occurred, and then, the
channel video that has an alarm occurred will be displayed on TV.
~
Camera #(1~32):
select the camera channel video that wants to be
displayed on TV when an alarm is activated.
b.
Retrieve time:
set the waiting duration before system switching back to original
display mode on TV automatically. If the retrieve time is un-mark, the alarm video
will keep displaying until user switch back to normal display mode manually. The
retrieve time range is 3~ 600 seconds.
