22
Reset SW lead
Watchdog line
NV7000H
2.9.5
Connecting the Watchdog line to NV9000E
4. Look for the labeled RESET SW switch lead and connect it to the NV9000E card reset
pin.
5. Connect the supplied Watchdog line to the NV9000Ecard watchdog pin and the other
end to the motherboard RESET SW panel. If you are not sure, please refer to the
motherboard user manual.
6. You may now replace back the PC cover and connect all the cables.
R eset S W lead
W atchdog line
NV9000E
2.10 Connecting the Cameras, a TV and Audio device
2.10.1
Connecting the Cameras, a TV and Audio device to NV3000/5000
1. Connect the cameras to the BNC video input port (see
). If you
have installed more than one card, please refer the sequence of the camera to the
number of cards installed in installing the card section.
2. Connect one end of the RCA video cable (not supplied) to the TV OUT port of
NV3000/5000 card and the other end to the TV video input port. If you are not sure,
please refer to the TV user manual.
NV3000/5000
Camera 1 Camera 2 Camera 3 Camera 4
RCA cable
Television
IN 1
IN 2
IN 3
IN 4
TV OUT
3. Connect the audio devices to the Audio input port of the I/O card.
