39
Appendix B. Regulatory Information for the FXT 2x50 Series
Node
This section provides regulatory information for the FXT 2x50 Series node.
B.1. Safety
Table B.1. Electrical safety
Country/Locale
Directive/Test Standard(s)
Regulatory Marks
USA
UL 60950-1, Second Edition, March 2007
cCSAus
Canada
CAN/CSA-C22.2 No. 60950-1-07, Second Edition, March 2007
cCSAus
European
Community
2006/95/EC Low Voltage Directive (LVD)
EN 60950-1:2006+A11:2009
B.2. EMC
Table B.2. Electromagnetic compatibility
Country/Locale
Directive/Test Standard(s)
Regulatory Marks
Emissions
USA
FCC 47CFR Part 2 and Part 15, Class A
ANSI C63.4-2003
Verified Class A
Limit
Canada
ICES-003, Issue 4, February 2004
CAN/CSA-CEI/IEC CISPR 22:02, Class A
Verified Class A
Limit
European
Community
2004/108/EC Electromagnetic Compatibility (EMC) Directive
EN 55022:2006 +A1:2007 Class A
EN 61000-3-2:2006 +A1:2009+A2:2009
EN 61000-3-3:2008
Immunity
European
Community
2004/108/EC Electromagnetic Compatibility (EMC) Directive
EN 55024:1998 +A1:2001 +A2:2003
B.3. USA FCC Notice and Caution
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his or her own expense.
Changes or modifications not expressly approved by Avere Systems could void the user’s authority to
operate the equipment.
