30
Powering Off an FXT Series Edge Filer Node
g.
If desired, lock the bezel by using the key provided in the accessory kit.
6.3. Powering Off an FXT Series Edge Filer Node
In an electrical emergency, disconnect all power from the node by removing all power cords or by
operating the emergency power disconnect mechanism installed for the node.
➣
To power off the FXT Series node:
1.
Log in to the Avere Control Panel.
2.
Click the Settings tab, then click FXT Nodes under Cluster Configuration to go to the FXT Nodes page.
3.
Locate the node that you want to power off from the listing of nodes and click the Power down button.
4.
Wait a few moments for the node to shut down.
Except when instructed by Avere Global Services, do not use the physical Power or Reset buttons on the
front of the FXT Series node to power off the node. Doing so can potentially result in lost or corrupted
data.
