function or input/output mode change.
10.5.4.3 [Logo Time Out]
10.5.4.4 [Standby Time Out]
10.5.5 [Setting]
10.5.5.1 Audio [Mute]
Five sub-menu under [Settings] menu:
[Mute] Audio mute or enable
[Frame Lock]: system synchronization
[Box ID]: Set control ID
[Profile]: Save profile settings
[Network]: set RS232 and network control
Audio Mute:
[Mute Off] will enable audio output.
[Mute On] will disable audio output.
[Mute] hot key in remote controller is
available
To set the time to show Splash screen.
If zero is selected, then the splash screen
will not be showed during system booting up
period.
The default setting for [Standby Time Out] is
60 seconds. MLT-PROWALL-4K will
automatically cut off output signal if no input
signal is detected after 60 seconds. The time
can be set by user. If the time is set to “0”,
then MLT-PROWALL-4K will not turn off the
output signal even no input signal is detected.
38
www.av
enview.com
