10.4.2 Zoom
User can set both Horizontal and Vertical Zoom value based on the array of the Display Units. In below example, each
number means one Display Units (3-4 LCDs) and also means one MLT-PROWALL-4K.
Example A:
Example B:
When user selects desired display mode,
the mode # will be showed at the bottom.
Mode # 145 is showed in left figure.
User can set [Display Mode] Dip SW to get
this display mode. If user doesn’t set this
mode in Dip SW, after turn off/on MLT-
PROWALL-4K again, the display mode will
be switched back to Dip SW setting mode.
3x1 MLT-PROWALL-4K
horizontal cascade: --Horizontal
Zoom=3
--Vertical zoom=1
MLT-PROWALL-4K is designed with 3-4 LCDs as one
Display Unit and the display modes are preset
inside the system. User can’t change display
style inside each Display Unit.
Zoom function is to split the source image
content for different Display Units in
multiple MLT-PROWALL-4K cascade
applications.
In 3x3 MLT-
PROWALL-4KEx
cascade: --Horizontal
Zoom=3
--Vertical Zoom=3
34
www.av
enview.com
