5.5 How to set DIP SW
ITCH
5.5.1 Example one
* Mode 145 as example:
VG A IN
DC IN
12 V 3.33 .0A
DisplayPort
DVI-I
TV 2
TV4
RS-232
TV3
TV1
OUTPUT
INPUT
CONTROL
IR Ext
HDM I
Loop Out
5.5.2 Example two
* Mode 124 –
– 75counterclockwise rotation(Ratio 1.77)
(#4 output will show full screen image)
ON
ON
TV1
TV2
TV3
TV4
MLT-PROWALL-4K
1. Mode 145 means DIP SW pin #1, #4 & #5 shall be set to
“ON” (UP) position.
2. MLT-PROWALL-4K output connection
MLT-PROWALL-4K TV1 output is connected to #1 LCD
Đ Đ
Đ Đ
MLT-PROWALL-4KTV2 output is connected to #2
LCD MLT-PROWALL-4K TV3 output is connected
to #3 LCD MLT-PROWALL-4K TV4
output is connected to #4 LCD
Mode 124 means DIP SW pin #1, #2 & #4 shall be set
to “ON” (UP) position.
MLT-PROWALL-4K output connection
1.1
MLT-PROWALL-4K TV1 output is connected to #1 LCD
1.2 MLT-PROWALL-4K TV2 output is connected to #2 LCD
1.3 MLT-PROWALL-4K TV3 output is connected
to #3 LCD
1.4 MLT-PROWALL-4K TV4 output will show full screen content same
as signal source.
6
www.av
enview.com
11
www.av
enview.com
