6.3 Preset mode: Mode 01
6.4 Preset mode: Mode 03
[Display Mode] DIP SW #1 is set at “ON”
position. It will show 2x2 video wall. Connect
MLT-PROWALL-4K
outputs to related LCD
a. TV1 to #1 LCD
b. TV2 to #2 LCD
c. TV3 to #3 LCD
d. TV4 to #4 LCD
To check if Bezel compensation is
required or not. If yes, please enable
“Bezel” compensation DIP SW.
User can show dual contents in one 2x2
video wall.
To select PIP Input source and set [PIP
Mode] at [POP Full] position, user will get
full screen POP image.
User can select [POP Raw] to keep
original aspect ratio in two contents.
Please see section 5.3 for more details.
Power OFF/ON the system again.
TV1
TV2
TV4
TV3
TV1
TV3
TV2
TV4
1. [Display Mode] DIP SW #3 is set at “ON”
position.
2. Connect
MLT-PROWALL-4K
outputs to related LCD
a.
TV1 to #1 LCD
b.
TV2 to #2 LCD
c.
TV3 to #3 LCD
d.
TV4 to #4 LCD
3. To check if Bezel compensation is required or
not. If yes, please enable “Bezel” compensation
DIP SW.
4. Top two TVs are installed at Down Flip
position so that the adjacent edges of
the TVs have the same bezel size.
(please activate [Image Properties]
-
[Orientation]
-
select image
direction)
14
www.av
enview.com
