6 MLT-PROWALL-4K Application case study
6.1 Preset mode: Mode 145
6.2 Preset mode: Mode 00
1. DIP SW #1, #4 & #5 pins in [Display Mode] are
set at “ON” (UP) position.
2. Connect MLT-PROWALL-4K outputs to related LCD
a.
TV1 to #1 LCD
b.
TV2 to #2 LCD
c.
TV3 to #3 LCD
d.
TV4 to #4 LCD
3. To check if Bezel compensation is required or
not. If yes, please enable “F2” bezel
compensation DIP SW.
4. If PIP is required, set DIP SW in [PIP Input],[PIP
Mode], and [PIP Size & Location].
After finishing DIP SW setting, Power OFF and ON
again is required to execute the command in DIP SW
setting in MLT-PROWALL-4K.
All DIP SW pins in [Display Mode] are set at
“OFF” position.
All outputs will have the same contents
as input source. It becomes 3x in / 4x out
video converter and switcher.
If PIP is required, please set DIP SW in [PIP
Input], [PIP Mode], and [PIP Size &
Location].
TV2
TV4
TV3
TV1
13
www.av
enview.com
