7.4 Case study B: 4k/2k 3x3 video wall
a.
Select preset display mode: Mode 35/36
b.
Connect the same signal to all MLT-PROWALL-4K.
c.
Video wall setting in MLT-PROWALL-4K
Items
Zone A
Zone B
Zone C
Zoom
H=1, V=3 H=1, V=3 H=1, V=3
Pan
H=1, V=1 H=1, V=2 H=1, V=3
Overlap
Bottom
Top/Btm
Top
d.
Video distributor is required to feed the same signal to all MLT-PROWALL-4K.
e.
To set overlap pixels to fine tune the image position among each MLT-PROWALL-4K if necessary.
f.
During [Overlap] adjustment, the image may have frame tear. It will disappear after power ON again.
g.
Save the setting to [Profile] under [Options]Đ[Settings] menu.
7.5 Case study C: 4k/2k 8x TV irregular video wall
a.
Select preset display mode: Mode 126/134
b.
Connect the same signal to all MLT-PROWALL-4K.
c.
Video wall setting in MLT-PROWALL-4K
Items
Zone A
Zone B
Zoom
H=2, V=1
H=2, V=1
Pan
H=1, V=1
H=2, V=1
Overlap RH Edge
LH Edge
Overlap pixels for Zone A (Display Unit A) & B (Display Unit B) shall be the same. User can open [Overlap] menu and
select [RH Edge] for A & [LH Edge] for B, then increase the [Overlap] value gradually in both [Display
A
B
C
16
www.av
enview.com
