Tightening torque
O
Tighten all screws according to the tightening torque
from the following table.
Connecting the pressure lines
1.
Connect the pressure lines to the intermediate stop.
The connections point to the rear.
2.
Guide the pressure lines under the slide or under the
surface to the corresponding connections in the
system.
7
Setting the Sequences
O
Set the sequences for the application of pressure to the
intermediate stop as follows:
Sequence of the positions for effective direction to the
right
Screw
M3
M4
M6
M8
Tightening torque (Nm)
0.7
2.9
9.8
24
NOTICE
Damage to the pressure lines!
If pressure tubing protrudes into the travel range of the
slide or the components, the tubing can be damaged or
torn away.
O
Make sure during installation that the pressure
tubing connected at the intermediate stop cannot
protrude into the travel range of the slide or the
components.
#
Pressure
to
Description
1
P3
Slide
in
home position
Detent
extends
2
P1 and P3
Slide travels to intermediate stop
Detent is
extended
3
P3 and P1
and P2
Detent remains
extended
WARNING!
Prior to moving from the
intermediate-stop position,
it is mandatory that the two air
chambers are pressurized. Otherwise,
the slide will travel toward the empty air
chamber and the exhaust air throttling
will have no effect.
4
P1 and P2
and P4
Detent
retracts
5
P1
Slide travels to the
end position
6
P2
Slide travels back to the
home position
Detent MUST remain
retracted
Air connections legend
P1
–
Air chamber 1 of the rodless cylinder
P2
–
Air chamber 2 of the rodless cylinder
P3
–
Air connection 1 of the intermediate stop
P4
–
Air connection 2 of the intermediate stop
Possible sequences for the positions
The following sequences of the positions are possible:
(1)
Æ
(2)
Æ
(3)
(1)
Æ
(2)
Æ
(1)
Æ
(3)
(1)
Æ
(3)
Æ
(2)
(The detent has to be modified for this
sequence; see “Modifying the intermediate stop”.)
P1
P1
P2
P3
P4
#1
P1
P1
P2
P3
P4
#2
P1
P2
P3
P4
#3
P1
P3 P4
P2
#6
P2
P1
P3
P4
#4
P2
P1
P3 P4
#5
(1)
(3)
(2)
AVENTICS
| RTC-CG and HD | R402005942–BDL–001–AB | English
6
