19
I
IMPIEGO
PREDISPOSIZIONE
Fissare il magnete (in dotazione) sulla porta o finestra da pro-
teggere, ed il rivelatore AF913R sull’infisso. Selezionare se desi-
derata la funzione di fine allarme tramite il microswitch 3:
ON = fine allarme abilitato
OFF = fine allarme disabilitato.
Può essere inserita tramite il microswitch 4 la protezione anti-
shock:
ON = antishock abilitato
OFF = antishock disabilitato
Regolare infine il contaimpulsi (pulse count) come indicato in
fig. 4 per ottenere un allarme antishock dopo il numero di impul-
si desiderato.
Abilitare l'ingresso NC rimuovendo JP2.Collegare all’ingresso
NC della morsettiera del riv. AF913R il contatto d’uscita (NC) di
un rivelatore inerziale a vibrazione o di un rivelatore a fune per
protezione tapparelle. Regolare il contaimpulsi (pulse count)
come indicato in fig. 4 per ottenere un allarme dopo il numero di
impulsi desiderato.
Collegare alla morsettiera il contatto d’uscita di un rivelatore per
allarme tecnico. È consigliabile utilizzare l’ingresso NA che esclu-
de automaticamente il contaimpulsi.
Protezione
porte e finestre
Protezione tapparelle,
muri (collegamento esterno
di rivelatori inerziali o
rivelatori a fune)
Allarmi Tecnici
(collegamento esterno di
rivelatori per allarmi tecnici)
C.403 new 4-06-2002 13:21 Pagina 19