40
G
Installation
Open the detector by levering on the fastening ring by means of a screwdri-
ver. If the intrusion protection is used, fasten the detector body on the wall
or the frame by means of screws.
Use silicon and not the adhesive tape if it is installed on glass.
Tampering alarm
At any moment by opening the enclosure, the tampering alarm is transmit-
ted by the corresponding micro-switch.
By means of a second micro-switch placed on the back of the card, the
detector transmits also the removal alarm.
The removal alarm can be connected or disconnected by means of the JP1
jumper (see fig. 4).
Alarm of battery discharged
3 ”beeps” produced by the detector (at each alarm transmission) indicate
that the battery needs to be replaced over one month before its complete dis-
charge.
C.403 new 4-06-2002 13:21 Pagina 40