27
G
In order to get more information about the operation of the detectors see
from pag. 36 to 45.
Adding more transmitters (up to 16)
1) Press the reset push-button when the device is already powered (the
already stored codes will be kept).
2) Release the reset push-button. L2 blinks (learning code mode)
3) Programme more transmitters as indicated at point 4 previous par.
4) L2 switches on for 2 seconds to confirm that the new codes have been
stored
5) Press reset push button again to quit programming.
Applications
AF904RR has two relays (called relay A and relay B) and 3 Leds. Depending
on the transmitter which it is connected to, it has different applications.
Note 2: the contacts of the relays are of the NO type, that-is, they close when
the relays are energised.
C.403 new 4-06-2002 13:21 Pagina 27
