Avaya Secure Router 2330, Hardware Installation

Page: 42 / 126

Figure 21: Mediation Server Module for OCS
The following table specifies connectors and recommended cable types and lengths.
Table 26: Cable and connectors
Port Connector Recommended
cable type
Minimum cable
length
Maximum cable
length
Console RJ45 Up to 7 signals
plus ground N/A Up to 328 ft (100
m) at 9600 bps
Video HD15F (female) VGA cable N/A N/A
The following table describes the Mediation Server Module LED indicators.
Table 27: Module LEDs
LED Description
STA Operational status of the module:
• Off: There is no power present, or the unit has completed a boot or
self-diagnostics test and is ready for use
• Amber, slow blink: The module is in a sleep state
• Amber, blinking: A boot or self-diagnostics test is running
ACT The current release does not support the activity status (ACT) LED.
The ACT LED is always off.
HDD Status of hard disk drive:
• Off: There is no activity at the hard drive (that is, no device is
accessing the hard drive)
• Green, blinking: There is activity at the hard drive (that is, at least one
device is accessing the hard drive)
CF Status of Compact Flash card:
• Off: There is no Compact Flash card installed, or the installed
Compact Flash card is not ready for activity
• Green, solid: The installed Compact Flash card is ready for access
• Green, blinking: There is activity at the Compact Flash card
Avaya Secure Router 2330/4134 hardware components fundamentals
42 Installation — Hardware Components August 2013
Comments? infodev@avaya.com