Avaya S3210, Manual, Page: 61 / 84

Message Networking Help
Home | Search
Print | Back | Fwd | Close
Getting Started Admin Maintenance Reference
Home > Maintenance > Performing voice equipment diagnostics > Testing voice ports
Testing voice ports
To test a voice port without removing the analog port board from service:
1. Start at the Administration menu, and select Diagnostics > Voice Equipment Diagnostics > Voice Port
Loop Around Test .
The system displays the Voice Port Loop Around Test page.
2. Complete the fields on the page. For information about the fields on this page, click Help .
3. Click
Test
.
The system completes the diagnostics and displays the Voice Port Loop Around Test Results page. The
results page indicates whether each test passed or failed. The result
not tested appears next to any test
you did not select under Test Type on the Voice Port Loop Around Test page.
4. Click
Return to Main
to return to the Administration menu.
Top of page
Message Networking Help
Home | Search
Print | Back | Fwd | Close
Getting Started Admin Maintenance Reference
Home > Administration > Performing acceptance testing > Calling Message Networking ports
Calling Message Networking ports
To verify that the Message Networking ports are all functioning properly, dial each port individually to make sure
that Message Networking answers.
Top of page
61