manualshive.com logo in svg

Avaya S3210, Manual, Page: 39 / 84

Share
Download
Avaya S3210 Manual Download Page 39

Message Networking Help 

Home

 | 

Search

  

Print

 | 

Back

 | 

Fwd

 | 

Close

  

Getting Started

 

Admin

 

Maintenance

 

Reference

 

Home

 > 

Installation

 > 

Installing the system hardware

 > 

Installing the servers

 > the monitor, keyboard, and mouse

Connecting the monitor, keyboard, and mouse  

This topic describes how to make the connections between the system and the following peripheral devices: 

!

Monitor

  

!

Keyboard and mouse

 

Connecting the monitor  

A monitor is available for purchase for use with the Message Networking system or the customer can supply a 
monitor. Most standard monitors will work with the Message Networking system.  

Two cables connect the monitor to the system:  

!

Video cable connector: The video cable connector has a video input connector at one end. The other end 
of the cable is permanently attached to the monitor.  

!

Power cable: The power cable for the monitor connects to an AC outlet on the UPS.  

To connect the monitor cables: 

1. Plug the video cable connector from the monitor directly into the video connector located on the back of 

the chassis. See 

S3210R and S3210 back views

 and 

S3400-H back views

if you need to locate the video 

connection on the back of the servers.  

2. Tighten the thumbscrews on the video cable connector with your fingers or with a small flat blade 

screwdriver.  

3. Plug the female end of the power cable into the monitor.  
4. Plug the male end of the power cable into an AC outlet on the UPS. 

Connecting the keyboard and mouse 

Connect the PS/2 cables for the mouse and keyboard to their corresponding connectors on the back of the 
server. The mouse connector is color-coded green, and the keyboard connector is color-coded purple.  

If the customer chooses, the customer can provide a standard PS2 mouse and plug the mouse cable into the 
mouse receptacle.  

Continue with 

Connecting the Message Networking server to the LAN

. 

  

Top of page

  

39

Summary of Contents for S3210





















































































Reviews:

No comments