Avaya IP500 V2 Installation Manual Download

Page: 64 / 71

Voicemail Ringback On/Off

These two features switch new message ringback notification on/off. No telephone number is

required for either of these features.

Auto Attendant

This feature is used for the recording of auto attendant prompts and greetings. Normally the short

codes for this are created automatically. However they can be deleted and reassigned as required.

Record Message

Allows the recording of announcement messages for users and hunt groups.

Shutdown Embedded Voicemail

Allows the Embedded Voicemail service provided by the memory card or System SD card to be

disabled. For IP Office Release 6 and earlier systems, this short code should be used before

removing a memory card from the system. For IP Office Release 6 and later systems, a memory

card shutdown command should be used instead.

Shutdown Embedded Voicemail

Allows the Embedded Voicemail service provided by the System SD card to be disabled. The

System SD card should be disabled before removing it from the system. Although this short code

is available, the preferred method to use to disable the System SD card is to use the memory card

shutdown command available in IP Office Manager under

File > Advanced > Memory Card

Command > Shutdown

Startup Embedded Voicemail

Allows an Embedded Voicemail service that has been shutdown to be restarted.

Related links

Short Codes

on page 62

Miscellaneous

September 2020

Embedded Voicemail Installation

Comments on this document? [email protected]

Summary of Contents for IP500 V2








































































Search results

Summary of Contents for IP500 V2

Reviews:

Related manuals for IP500 V2

Brands by name

Popular brands

Avaya IP500 V2, Installation Manual

Search results

Summary of Contents for IP500 V2

Reviews:

Related manuals for IP500 V2

Brands by name

Popular brands