Avaya IP500 V2 Installation Manual Download

Page: 27 / 71

• For announcements configured for users to be used effectively, the user's

No Answer Time

must be extended or

Voicemail On

must be unselected.

Related links

Hunt group mailbox configuration

on page 36

Configuring announcements

on page 27

Recording announcements using short codes

on page 28

Configuring announcements

Procedure

1. Open IP Office Manager and receive the IP Office configuration.

2. In the left navigation pane, do one of the following:

• To configure an announcement for a user, click

User

• To configure an announcement for a hunt group, click

Hunt Group

3. Click the

Announcements

tab.

4. Set the fields to the appropriate values. See

Announcement settings

on page 27 for more

information.

5. Click

to save the changes.

6. Select

File > Save Configuration

to merge the changes back to the system.

Related links

Announcements

on page 26

Announcement settings

Name

Description

Announcements On

Default = Off.

This setting enables or disables announcements.

Wait before 1st
announcement

Default = 10 seconds. Range = 0 to 9999 seconds.

This setting sets the time delay from the calls presentation, after which the first
announcement should be played to the caller. If

Synchronize Calls

selected, the actual wait may differ.

Flag call as answered

Default = Off.

This setting is not currently used.

Table continues…

Announcements

September 2020

Embedded Voicemail Installation

Comments on this document? [email protected]

Summary of Contents for IP500 V2








































































Search results

Summary of Contents for IP500 V2

Reviews:

Related manuals for IP500 V2

Brands by name

Popular brands

Avaya IP500 V2, Installation Manual

Search results

Summary of Contents for IP500 V2

Reviews:

Related manuals for IP500 V2

Brands by name

Popular brands