Avaya IP Office 4602, Administrator'S Manual

Page: 43 / 50

Issue 1.2 January 2005 43
Appendix B: Configuring a Dial Plan
Introduction
This appendix describes how to configure the DialPlan parameter.
Note:
Note:
If the HotLine feature is enabled, you cannot configure a dial plan. The DialPlan
feature is automatically disabled whenever the HotLine feature is active. Since
Avaya does not support the HotLine feature, be sure you have not inadvertently
enabled this parameter.
Dial Plan Setup
The 4602 SIP Telephone uses custom dial plans to assist in routing telephone calls and to
minimize dialing delays experienced by users. In addition, the phone automatically attempts to
dial a non-null dial sequence after a period of DialDelay seconds have passed.
The following table shows the syntax for dial plan entries.
Table 2: Dial Plan Syntax
To Specify Enter Result
Digit
0 1 2 3 4 5 6 7 8 9 0
Identifies a specific digit.
Range of Digits
[Digit-Digit] OR
Specifies a range that will match a digit.
Wildcard
x OR
x+
Match any single digit that is dialed.
Matches any arbitrary number of digits or
range of digits including none.
Multiple Dial Plans
|
Use the | symbol to separate multiple dial
plans. For example: 911|9xxxxxxx|