Avaya IP Office 4602, Administrator'S Manual

Page: 38 / 50

Configuration Parameters
38 4602 SIP Telephone SIP Release 1.2 Administrator’s Guide
DTFormat 1 ASCII
character Date and time format for LCD:
0 = mm/dd/yy hh:mm(a/p)
1 = dd/mm/yy hh:mm(a/p)
2 = mm/dd/yy hh:mm(24-hour time)
3 = dd/mm/yy hh:mm(24-hour time) 0 CFG,
WEBA,
WEBU
DtmfMethod 1 ASCII
character 0 = Always use in-band signaling
(never send 2833)
1 = 2833 by negotiation in SDP
(Session Description Protocol)
2 = 2833 always (ignore SDP) 1 CFG,
WEBA
Ethernet2 1 ASCII
character Status of the second Ethernet
Interface.
0 = disabled
1 = Auto negotiate 1 CFG,
WEBA
ForcedLogin 1 ASCII
character Forces the user to enter a numeric
extension and password to log in to
the phone. The numeric login and
password are used as the user
name and password with the SIP
registrar. The password
automatically has the string “elite”
appended because many
registrars require a non-numeric
character in the password. If
ForcedLogin is disabled, the
SipName and SipPwd must be
provided via the Web interface or a
Configuration file for the phone to
properly register. Only numeric
extensions and passwords are
allowed.
0 = No Login Required (disabled)
1 = Login Required
In addition, the set keeps the last
valid login and password in
non-volatile memory so that it can
be automatically submitted on a
reboot. If the user logs off the
phone, the non-volatile values are
cleared. 0 CFG,
WEBA
GatewayAddress Dotted
Decimal
ASCII Gateway address for the
telephone. 0.0.0.0 DHCP,
MAN,
WEBA
HoldRemind 1 ASCII
character If enabled, the Hold reminder tone
sounds every minute while any call
is in the hold state.
0 = Disabled
1 = Enabled 0 CFG,
WEBA,
WEBU
Table 1: 4602 SIP Telephone Parameters (continued)
Parameter Value Type Value Default Source(s)
4 of 8