Avaya IP Office 4602 Administrator'S Manual Download Page 23

Page: 23 / 50

Setting Parameters

Issue 1.2 January 2005

Configuration File Examples

Figure 1: Configuration File Examples

4602D01A.txt

comon.txt

Required Parameters

Certain parameters must be specified for the 4602 SIP Telephone to operate properly in most
SIP environments. Those required parameters are:

●

IP Address (IPAddress) - Usually supplied by DHCP, but can be manually configured from
the dialpad or using the Web interface.

●

Subnet Mask (SubNetMask) - Usually supplied by DHCP, but can be manually configured
from the dialpad or using the Web interface.

●

Gateway (GatewayAddress) - Usually supplied by DHCP, but can be manually configured
from the dialpad or using the Web interface.

●

DNS Server IP Address (DnsAddress) - Usually supplied by DHCP, but can be manually
configured from the dialpad or using the Web interface. This parameter must be supplied if
a domain is specified for the proxy or registrar.

# This configuration file is version 1.0 created on 9/15/03.

AppName sip_4602ap0079.ebin

BootName sip_4602bt0079.ebin

# Includes must be at the end of the main configuration file only

Include common.txt

# This common configuration file is version 1.0 created on 9/15/03.

Hotline 5000

MsgButtonUrl 77777

DstEnable 1

DstEnd 0430

DstStart 1026

DialPlan 911|[1-8]xxx|9xxxxxxx|90|91xxxxxxxxxx

ForcedLogin 1

CallFwdAddress sip:[email protected]

DTFormat

ProxyServers

192.168.0.9:5060

RegistrarServers 192.168.0.9:5060

Summary of Contents for IP Office 4602



















































Search results

Summary of Contents for IP Office 4602

Reviews:

Related manuals for IP Office 4602

Brands by name

Popular brands

Avaya IP Office 4602, Administrator'S Manual

Search results

Summary of Contents for IP Office 4602

Reviews:

Related manuals for IP Office 4602

Brands by name

Popular brands