Avaya IP OFFICE 40DHB0002USCL Installation Manual Download

Page: 5 / 70

Introduction

General - Page 5

Introduction

General

This manual covers the installation of your Avaya IP Office equipped with release Level 1.0+

software. It is intended for use by installers and maintainers who have successfully completed the

appropriate IP Office training courses.

Ensure that you have read and understood this manual before beginning installation.

Scope of Manual

This manual, for IP Office systems only, covers the following areas:
–

Technical Data :

This manual contains information on the Port Pinouts/Safety classifications, cables, and basic

technical specifications only. Descriptions of the functionality, features and performance of the IP

Office are covered by the Product Description.

–

Rack Installation :

You can install your IP403/406/412 Office (base units and expansion modules) into a suitable

rack system (see page 42). The IP401 Compact Office can be wall mounted (see page 43).

–

System Programming :

System programming is necessary for installation and maintenance of the IP Office. This manual

only covers very basic programming (see page 45). For full details refer to the Administration Help

files contained on the Installation CD supplied with every unit.

–

Terminal/Telephone Usage :

This manual does not detail the usage and functionality of IP Office terminals/telephones. These
details are to be found in the appropriate User Guides

The terminals/telephones that are supported by the IP Office are:

Avaya 2000 Series

20AT, 20CC, 2010, 2030, 2050, (analog only), 20DSS/BLF and 20DT

Avaya 4400 Series

4406D, 4412D, 4424D and 4450DSS*

Avaya 4600 Series

4606 (Level 1.1+ only), 4612 and 4624

Avaya 6400 Series

6408D+, 6416D+M, 6424D+M and XM24(DSS)

*Caution:

See page 56 for wiring details on a 4450DSS module.

IP Office Installation Manual

Introduction - Page 5

40DHB0002USCL – Issue 7 (09/25/2002)

General

Summary of Contents for IP OFFICE 40DHB0002USCL







































































Search results

Summary of Contents for IP OFFICE 40DHB0002USCL

Reviews:

Related manuals for IP OFFICE 40DHB0002USCL

Brands by name

Popular brands

Avaya IP OFFICE 40DHB0002USCL, Installation Manual

Search results

Summary of Contents for IP OFFICE 40DHB0002USCL

Reviews:

Related manuals for IP OFFICE 40DHB0002USCL

Brands by name

Popular brands