WLAN IP Telephony Handset Users Guide
44
NN40011-039 Issue 1.2 BCM Rls 6.0
1. Press . The Push-to-Talk session is pre-empted.
2. After the call is over, press as usual to go back on-hook. The Push-to-
Talk session goes out of pre-empted mode and becomes active again.
If an active Push-to-Talk call has not ended, the audio is heard again.
Make a call during a Push-to-Talk call
A call can be made while in a Push-to-Talk call.
1. Press . The Push-to-Talk session is pre-empted.
2. After the call is over, press as usual to go back on-hook. The Push-to-
Talk session goes out of pre-empted mode and becomes active again.
If an active Push-to-Talk call has not ended, the audio is heard again.
Twinning
The WLAN handsets have the ability to be twinned to a BCM digital desk set,
so that when a call is sent to the Digital desk set, the WLAN handset also
rings. The programming for this is done under Unified Manager.
1. Log into the BCM Element Manager main configuration screen. From
the
Configuration
tab open the
Telephony
folder followed by the
Sets
folder and select the
All DN’s
link.
2. Scroll down to the WLAN DN number that you wish to have twinned.
Select the DN number, then open the sub menu for
Answer DN’s
.
