Avaya i2210 User Manual Download

Page: 13 / 46

WLAN IP Telephony Handset Users Guide

NN40011-039 Issue 1.2 BCM Rls 6.0

Status Indicators 6120/6140 Handsets

Signal strength indication

New Voice Message

Battery charge. When only one level remains, the battery pack must be
recharged.

Active speakerphone

Current line in use

Up and down arrows are displayed when the menu has additional
options above or below. Left or right arrows are displayed during
editing.

Incoming Call

Incoming call from Messaging Application

Incoming Push to Talk call (This feature is available only on the WLAN
Handset 6140)

The priority PTT ring icon indicating an incoming call on the priority
PTT channel. This call overrides any other calls.

Muted

Muted softkey pressed

Locked

Keypad Locked

No Service

The no service indicator indicates that you are out of the coverage area
and cannot receive or place calls

Indicates that the handset is downloading code.

The ring indicator icon is used to display the Real-Time Location
System (RTLS) icon, indicating that the administration option has been
set to ON. An incoming call, triggering the ring indicator icon, takes
priority over the RTLS icon.

For full detailed instructions relating to the use of 6120 and 6140 handsets
please refer to the WLAN Handset 6120 and WLAN Handset 6140 User
Guide

Summary of Contents for i2210















































Search results

Summary of Contents for i2210

Reviews:

Related manuals for i2210

Brands by name

Popular brands

Avaya i2210, User Manual

Search results

Summary of Contents for i2210

Reviews:

Related manuals for i2210

Brands by name

Popular brands