WLAN IP Telephony Handset Users Guide
36
NN40011-039 Issue 1.2 BCM Rls 6.0
4. Enter the extension number using the handset keypad.
5. Press
Save
to save your extension number.
6. Do one of the following:
a. Press UP to return to the previous menu and set another option.
b. Press
to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to
the active (off-hook) state.
Set up Push-to-Talk
Push-to-Talk is available on the WLAN Handsets 2211 and 6140 only.
Push-to-Talk mode enables two-way radio communication with another WLAN
Handset 2211 user. You can enable/disable Push-to-Talk mode and select a
channel.
1. Press when in the standby state.
2. Press the
Up
and
Down
buttons to scroll through the menu and
highlight
Push-to-Talk
.
3. Press the
Select
button (or OK) to select Push-to-Talk.
4. Press the
Up
and
Down
buttons to scroll through the menu and
highlight one of the following settings:
a. Enable: Enables Push-to-Talk mode.
b. Disable: Disables Push-to-Talk mode.
5. Press the
Select
button (or OK) to select the setting.
6. If enabled, select a channel (1 to 8).
7. Do one of the following:
a. Press UP to return to the previous menu and set another option.
b. Press
to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to
the active (off-hook) state.
