Avaya G150, Installation And Configuration Manual

Page: 151 / 254

Using Shortcodes
Issue 1 June 2005 151
Forcing a Call to be Answered
Below is a sample short code that forces a call to be automatically answered.
Short Code: *83*N#
Telephone Number: N
Feature: DialDirect
N represents the extension that will be forced to automatically answer. For example, when a
user dials *83*201#, extension 201 will be forced to automatically answer the call.
Pick up a Ringing Phone
The sample short code below is a default within the Manager configuration. This shortcode
enables the user to pickup any ringing phone. Below is the setup for the shortcode.
●
Short Code: *6
●
Telephone Number: leave blank
●
Line Group ID: 0
●
Feature: CallPickupAny
Create a PSTN Backup Route
The sample short code below creates a PSTN backup route to extensions at the other
Communication Manager sites. For example, if the extensions (64xxx) at the Communication
Manager sites have DDI/DID of 1408 555 2xxx, then the following short code should be set up:
●
Short Code: 64xxx
●
Telephone Number: 14085552xxx
●
Line Group ID: 0
●
Feature: Dial
Modem Control Shortcode
The default shortcode, *4000*, controls the on/off functionality of the internal modem attached
to the first analog trunk (if the modem is enabled via Manager). To set up remote access, see
Remote Access .
Note:
Note:
If the system switches from suvivable to sub-tending mode while the modem is
switched On, it will remain On until G150 goes into survivable mode again or it is
restarted, because short codes are only processed during survivable mode.