Avaya G150, Installation And Configuration Manual

Page: 53 / 254

Administer IP Boards
Issue 1 June 2005 53
Administer IP Addresses and Interfaces
1. Type change node-names IP and press ENTER to display the IP Node Names screen.
The system displays the IP Node Names screen.
Figure 16: IP Node Names screen
2. Complete the following fields:
●
Name: Assign a unique name to the G150 Media Gateway.
Note:
Note:
This name must match exactly the name of the G150 Media Gateway as entered
on the System | SO Gateway | Gateway Name configuration in the G150
Manager. See
Identifying the G150 to the Communication Manager in Chapter 3
for detailed information on configuring this information on the G150 Manager
interface.
●
IP Address: Type the IP address associated with the G150 Media Gateway (LAN1
interface). Check with your LAN administrator, if necessary, for the appropriate address.
Note:
Note:
This IP address must match exactly the IP address of the G150 Media Gateway
as entered on the Configuration screen in the G150 Manager. See
Connecting
G150 to the Network & Communication Manager in Chapter 3.
3. Press ENTER to effect the changes.
4. Type list ip-interfaces and press ENTER to display the IP Interfaces screen.
The system displays the IP Interfaces screen.
change node-names ip Page 1 of 1
IP NODE NAMES
Name IP Address Name
default 0 .0 .0 .0 __________________ ___.___.___.___
remoG150denver 134.23.107.22 __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___
__________________ ___.___.___.___ __________________ ___.___.___.___