Installing Hardware for the G150 Media Gateway
36 Installation and Configuration of the G150 Media Gateway
Preparing for Installation
This section reviews the requirements for installing an G150 system. You must meet these
requirements for the system to operate safely and in the intended manner.
This section covers :
●
Tools & Parts Required
●
Space requirements
●
Environmental requirements
●
Power Supply Requirements
Tools & Parts Required
General :
●
Pozidrive No. 1 screwdriver for removal of unit covers.
●
Cutter/knife for cable ties.
●
Cable ties
●
Pozidrive No. 4 screwdriver for Analog Trunk 16 expansion module grounding post.
Note:
Note:
In addition, ensure that you have sufficient cables that are not supplied with the
modules, e.g. Line Cords for structured cabling and power supply cables.
Programming :
These are the tools required for programming of a newly installed G150 system.
●
PC running Windows 98 (2nd Edition), 2000 Professional (SP2) & Server (SP2), XP
Professional Server & XP Home, NT4 Workstation (SP6) & NT4 Server (SP6a) or 2003
Server:
Intel Pentium ll 333Mhz or faster, 100MB HD space, CD-ROM drive, COM port, terminal
emulation (e.g. HyperTerminal) and a super VGA Monitor (set to 1024 by 768). PC should
have a LAN card with either a fixed IP address (allocated by your system administrator) or
be using DHCP to obtain an IP address.
●
IP Cat. 5E patch cable (red - supplied with system).
●
G150 Administration CD.
●
G150 Feature Key device (Dongle).
Summary of Contents for G150
