manualshive.com logo in svg

Avaya DC-Net 4621 SW, User Manual

Share
Download
Avaya DC-Net 4621 SW User Manual Download Page 82

Chapter 9: Setting Telephone Options

82

Avaya one-X Quick Edition Release 2.0.0 Telephone User Guide

July 2006

 

To view the connection status of the Teleworker client telephone 

1. At the Teleworker client telephone, access the 

User Options

 menu as described in 

Displaying the User Options Menu on page 69

.

2. Select 

Teleworker 

on the 

User Options

 menu, or press 

8

 on the dialpad.

3. Select 

Status

 on the 

Teleworker

 menu, or press 

2

 on the dialpad. 

One of the following messages is displayed: 

●

When 

Local (No Teleworker) 

is displayed, Teleworker mode has not been enabled. 

See 

To enable or disable Teleworker mode on a Quick Edition IP Telephone on 

page 81

 to enable Teleworker mode. 

●

When 

Idle

 is displayed, Teleworker mode is enabled and the telephone is idle.

●

When 

Connecting...

 is displayed, the Teleworker client telephone is attempting to 

connect to a Teleworker server host—a session has not been established. The host IP 
address of the Teleworker server is also displayed in the display area.

●

When 

Connected

 is displayed, the Teleworker client telephone has connected to the 

Teleworker server host successfully and can access the remote one-X Quick Edition 
network. The host IP address of the Teleworker server is also displayed in the display 
area.

●

When 

No Server 

is displayed, an IP address for the remote Teleworker server host is 

required but has not been specified. See 

To specify the host IP address of a 

Teleworker server

on page 83 to specify the IP address.

Note:

Note:

A Teleworker client telephone cannot act as a server for another Teleworker client 
telephone. If an IP address has been specified and the IP address belongs to a 
Teleworker client telephone, the 

No Server 

message will be displayed.

●

When 

Not Authorized 

is displayed, the Teleworker server host does not recognize the 

Teleworker client telephone and the Teleworker server host refuses the connection. 

●

When 

Restart Required 

is displayed, the Teleworker server has uploaded a new 

configuration to the Teleworker client telephone. The configuration will not take effect 
until the Teleworker client telephone is restarted. Press the 

OK

 softkey to restart the 

Teleworker client telephone.

●

When 

Server Busy 

is displayed, the Teleworker server host is occupied with 

connections to two other Teleworker client telephones and cannot accept a third 
connection. The Teleworker client telephone will contact another Teleworker server 
host for a connection automatically.

●

When 

No Response 

is displayed, the Teleworker server host was unable to 

acknowledge the connection request from the Teleworker client telephone within a 
predetermined amount of time. If the Teleworker server host is unavailable, it may be 
because your Internet connection is down, your router or firewall has not been 
configured to pass P2P packets through a VPN tunnel correctly, or the Teleworker 
server host has been disconnected from the one-X Quick Edition network. Provided 

Summary of Contents for DC-Net 4621 SW



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands