Chapter 2: Installation
26
Avaya one-X Quick Edition Release 2.0.0 Telephone User Guide
July 2006
Pre-installation Checklist
You require the following items to install your Quick Edition IP Telephone. These items are
shipped with the Quick Edition IP Telephone. Verify that the Quick Edition IP Telephone
package includes the following items:
●
one Telephone set (includes a telephone stand),
●
one Category 5 (Cat5) modular line cord, for connecting the Telephone to an Ethernet LAN
or a PC, and
●
the
Avaya one-X Quick Edition Telephone Quick Installation Guide
.
Installing the Quick Edition IP Telephone
See
Figure 3
and
Figure 4
for two possible ways to assemble and connect a 4621 SW IP
Telephone.
Figure 5
and
Figure 6
show two possible ways to assemble and connect a 4610 SW
IP Telephone. Choose the assembly that is best for your situation.
Power is typically supplied to the Telephone by connecting the Cat5 modular line cord to a
802.3af PoE-enabled Ethernet LAN. Option A, shown in
Figure 3
and
Figure 5
, shows a
wall-jack connection, but you could connect the Cat5 modular line cord directly to a
PoE-enabled Ethernet switch. If your Ethernet network does not provide 802.3af-compliant
inline power, you must supply a PoE inline power supply such as the Avaya Model 1151B1 (see
Option B shown in
Figure 4
and
Figure 6
).
CAUTION:
!
CAUTION:
The last step in installing the Quick Edition IP Telephone must be applying power.
You may optionally connect the Telephone between a computer and the Ethernet LAN—the
Telephone and the computer share the connection. In this case, you must supply a second Cat5
(or better) modular line cord to connect the Telephone to the computer. For more information,
see
To share the Telephone LAN connection with a computer on page 33
.
Note:
Note:
To assemble and adjust the telephone stand, or wall-mount the Telephone if
required, see the
Avaya one-X Quick Edition Telephone Quick Installation Guide
.
