manualshive.com logo in svg

Avaya DC-Net 4621 SW, User Manual

Share
Download
Avaya DC-Net 4621 SW User Manual Download Page 71

Viewing and Modifying User Options

Avaya one-X Quick Edition Release 2.0.0 Telephone User Guide

July 2006

71

 

●

To view Teleworker registration information

on page 93

●

To view information about your Quick Edition IP Telephone

on page 94

Setting Password Options 

You can change, disable, or enable a password for accessing user options. Using a password 
prevents others from viewing or changing your user-option settings. A default password (12345) 
is factory installed and enabled on the Telephone. If you choose to leave password protection 
enabled, it is a good policy to change the default password to a password that is known only by 
you. 

Note:

Note:

You can change the password for accessing user options when password access 
is enabled. When you change the password for accessing user options, the 
Voicemail password is updated at the same time (the same password is used to 
access user options and Voicemail messages).

To change your password 

1. Access the 

User Options

 menu as described in 

Displaying the User Options Menu on 

page 69

.

2. Select 

Password

 on the 

User Options

 menu, or press 

1

 on the dialpad.

3. Select 

Change Password

 on the 

Password

 menu, or press 

1

 on the dialpad.

4. Enter your existing password, and then select the 

Next

 softkey.

5. Enter the new password, and then select the 

Next

 softkey.

6. When you are prompted to confirm the new password, re-enter the new password and 

then select the 

Next

 softkey.

A confirmation message is displayed.

7. Select the 

Ok

 softkey.

8. Press the Phone/Exit (

) button.

Tip:

Tip:

If your Quick Edition IP Telephone is connected to the same network as your 
computer, you can use the web browser on the computer to change the 
password. For more information about the web-based options, see 

Changing 

Your User Options and Voicemail Passwords on page 100

.

Summary of Contents for DC-Net 4621 SW



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands