Avaya 3.7, Configuration Manual

Page: 217 / 326

Resilient Tunnel
Issue 4 May 2005 217
5. You can edit, move up, move down or delete.
6. When finished, click Save to save your work.
Stopping and starting resilient tunnel services
Resilient tunnel services for a specific primary end-point or secondary end-point can be stopped
or started at any time.
Primary end-point service
To stop or start resilient tunnel services for a primary end-point:
1. Move to the Configuration Console window. Select Devices.
2. From the Device>Contents column, select the device that acts as the primary end-point for
a tunnel.
3. Click the Resilient Tunnel tab to bring it to the front.
4. Do one of the following:
●
Select the Enable Resilient Tunnel check box to start services.
●
Clear the Enable Resilient Tunnel check box to stop services.
5. Click Save to save your work.
6. To send the configuration to the device, click Update Devices.
Secondary end-point service
To stop or start resilient tunnel services for a secondary end-point:
1. Move to the Configuration Console window. Select Devices.
2. From the Device>Contents column, select the security gateway that acts as the secondary
end-point for a tunnel.
3. Click the Resilient Tunnel tab, to bring it to the front.
4. From the Resilient Tunnel List, select a specific secondary end-point.
5. From the Enabled column, do one of the following:
●
Select the check box to start services.
●
Clear the check box to stop services.
6. Click Save to save your work.
7. To send the configuration to the device, click Update Devices.