Avaya 3.7 Configuration Manual Download Page 198

Page: 198 / 326

Establishing security

198 Avaya VPNmanager Configuration Guide Release 3.7

17. The keepstate function allows a rule set for the intended traffic to also be applied to the

reply packets. The function can be applied to TCP, UDP, and ICMP packets.

18. Keepstate sets up a state table with each entry set up by the sending side. Reply packets

pass through a matching filter based on the respective state table entry. A state entry is not
created for packets that are denied.

19. Click Advanced to change the default keepstate values to TCP, UDP, or ICMP.

20. Click Finish to return to the Policy Manager for Firewall.

Summary of Contents for 3.7







































































































































































































































































































































Search results

Summary of Contents for 3.7

Reviews:

Related manuals for 3.7

Brands by name

Popular brands

Avaya 3.7, Configuration Manual

Search results

Summary of Contents for 3.7

Reviews:

Related manuals for 3.7

Brands by name

Popular brands