Connecting the components
25
Connecting the components
Before you begin
Connecting the components of the phone
Your Avaya 1220 IP Deskphone supports AC power or Power over
Ethernet (PoE) options, including IEEE 802.3af standard power.
If you are using PoE, where power is delivered over the CAT5 cable, the
LAN must support PoE. If you use PoE, you do not need an AC adapter.
To use local AC power, use only the Avaya-approved Global Power
Supply (NTYS17xxE6) and country-specific IEC cable. The Avaya-
approved AC adapter and country-specific IEC cable are ordered
separately.
1.
Attach the handset cord, with the longer straight section into the
handset jack on the back of the phone, then route the straight section
of the cord through the cord guide. Attach the other end of the
handset cord to the handset.
2.
Thread the supplied CAT5-e Ethernet cable through the bottom of the
stand as shown in
Figure 6 on page 28
.
CAUTION
Damage to Equipment
Do not plug the Avaya 2007 IP Deskphone into
a regular
phone
jack. This results in severe
damage to the IP Deskphone. Consult your
system administrator to ensure that you plug
your IP Deskphone into a 10/100BaseT
Ethernet jack.
CAUTION
Use only the approved Avaya Global
Power Supply with your Avaya 2007 IP
Deskphone.
